The PICK & BUILD system consists of two main sets of elements, a solid statically stable construction and thermal insulating fillers. Assembly of those we call underframe, the skeleton of simply building core. All elements are made of quality, durable and lightweight materials. Individual parts of the system are dimensioned so that they can be carried and installed manually (2-3 people).

The construction materials of the main constructions consist mainly of aluminum profiles, which are reinforced with galvanized steel at the joints with additional links.

• Construction ALU pillar
• Construction transverse ALU profile
• Fastening construction elements (strips/rails)
• Right angle steel link 90°
• U-profile steel side link
• Steel fasteners for foundations

Additional elements:

A gable roof is an "upgrade". This means that a flat-roofed building can also be later converted to a gable roof building by adding a steel link for a gable roof, and vice versa. In this case, the elements are only added or subtracted and are not changed or replaced.

• Construction steel link for gable roof (40° slope)
• Connecting steel link for rafters

Fillers consist of materials that provide thermal insulation and a vapor barrier. PURENIT, NEOPOR, ALU foil and plywood are applied in layers. This allows them to be easily inserted and screwed onto the construction with metric threads.

• Standard Floor filler
• Standard Wall filler
• Standard Ceiling filler
• Special fillers
  1. Floor filler for water supply and drainage
  2. Wall filler for heavier loadings
  3. Wall filler with standard ventilation opening
  4. Wall filler with opening and extra thermal protection for the chimney
  5. Wall filler for fuse box

• purenit
• EPS Neopor
• aluminum foil
• plywood

Thermal conductivity through the insulating filler without taking into account the proportion of ALU construction U = 0, 185 W / m2K

• purenit
• EPS Neopor
• aluminum foil
• plywood

Thermal conductivity through the insulating filler without taking into account the proportion of ALU construction U = 0, 183 W / m2K

In addition to the two basic forms of underframes, assembly can be made in a single axis (Z axis) and as well allows parallel compiling. This is the assembly in the second X-axis.
The system can therefore be assembled in series in the Z axis and in parallel in the X axis. Also a combination of both in the Z and X axes.